Rahul's RC Aircraft and other designs

Flying wing DLG  The details are : The airfoil is HS130 Span : 870 mm Root Cord : 196mm Tip Cord : 147 AUW : 125 gms The wing area is 149205 sq mm which translates to       wing loading of 2.74 oz/sq ft, and a wing cubic loading of 2.17,  The templates for hotwiring the wing.  The hotwired wing . Note the fuselage is a 4mm CF rod passing through the root. There is a 3mm balsa root which is in the center of the two wing halves and the CF fuselage rod also goes through it.  The faint line at 30% cord is where the a 3x1mm CF strip will be embedded to act as a spar A view of the wing tip. It gives you a perspective of the airfoil shape.... the foam tore of at the extreme tip trailing edge during handling The tail is made out of 3mm depron stuck onto the CF fuselage spine Also the 3x1mm CF strip which acts as a spar is visible The fuselage with a piece of scrap EPP foam attached tp the CF fuselage spine. This helps in holding the RX and the battery The...

 Javelin is a high aspect ratio swept flying wing. It is designed for high performance  and uses modern airfoil and construction techniques.  The planform of the wing is as above with inboard flaps and outboard elevons. It has a fuselage pod and wing tip vertical fins,  Span : 1700 mm Root and Tip cord : 175 mm Sweep : 22.5 degrees or 353mm Flaps : length 240 mm, cord 30 mm, starting 25 mm from root at the TE Elevon : length 340 mm, cord 30 mm, starting 3 mm from tip Airfoil : HS 522 standard thickness and camber. It is low drag , low Re airfoil . The details and the .dat file can be found here  https://www.aerodesign.de/english/profile/profile_s.htm#hs522 Twist : 4 degrees AUW : 840 gms  Electronics : 2212 1400kv motor, 30A esc, 9X4.8 prop, 4 x 9gm MG servos, 3s 2200mah bty. (the electronics used are more from what I have, rather than the most suited) Wing Area : 297500 sq mm, 461.13 Wing loading : 9.36 oz/sq ft, and Wing cubic loading : 5.2 CG ...